Cost Rack "Standard" SS-2 for snowboards double sided.
Additional options
Rack "Standard" SS-2 for snowboards double sided.
Double-sided racks SS-2 is designed to store snowboards of different length. Construct the model of the rack provides double-sided placement boards.
Side stand made of steel profile tubes. Holders for snowboards are made of waterproof plywood 15 mm thick. Horizontal plywood holders are height adjustable, allow you to place snowboards, as with mounts and without mounts. In the shelf SS-2 can accommodate up to 76-and snowboards without bindings.
The racks in this series snowboards are placed in a horizontal position in individual cells. The plywood mounts have a tilt, whereby the snowboard is securely down in the cell and is protected from falling.
The combination of metal elements of the shelf is made with galvanized screws with inner hexagonal recess under the wrench, and the nuts have flange with notches that allows the tightening nut to hold it only with your fingers without using a key.
In the base, a rack mounted on the screw supports. On Customer request it's possible to set wheel bearings. The equipment is painted with polymer powder coating with high protective and decorative properties. The Customer may paint the rack in any color according to RAL. It is also possible to manufacture the rack according to the individual sizes of the Customer.