Cost Rack Premium SP-5 for snowboards double sided.
Additional options
Rack Premium SP-5 for snowboards double sided.
Racks SP-5 is designed to store snowboards of different length with the established fixtures. Construct the model of the rack provides double-sided placement boards.
Side plates made of sheet metal with a thickness of 1,5 mm. Mounts for snowboards are made of sheet metal, thickness 4 mm. Horizontal snowboard holders are adjustable in height in steps of 5 cm, allowing placement of snowboards, as with mounts and without mounts. In the rack SP-5 can accommodate up to 38 and snowboards without bindings.
The racks in this series snowboards are placed in a horizontal position in individual cells. The snowboard holders have the inclination, whereby the snowboard is securely down in the cell and is protected from falling.
The combination of metal elements of the shelf is made with galvanized screws with inner hexagonal recess under the wrench, and the nuts have flange with notches that allows the tightening nut to hold it only with your fingers without using a key.
In the side pillars set decorative plastic panel, 2 mm thick, This panel from the front side closes the fastening elements and has the decorative function for the application of an individual design or logo.
In the base, a rack mounted on the screw supports. On Customer request it's possible to set wheel bearings or install the rack on the rails, also possible to install a panoramic of the plastic panel with the individual image, the size of the panel V. 2250 * S. 670 mm, and the handle for convenient travel of the rack. The equipment is painted with polymer powder coating with high protective and decorative properties. The Customer may paint the rack in any color according to RAL. It is also possible to manufacture the rack according to the individual sizes of the Customer.